Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

1 Stück Sprite Extruder Pro Upgrade Plated Copper Heizblock High Temperature Kompatibel mit Creality Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 3D Drucker (Kupferblock)

Kostenloser Versand ab 25.99€

9.99€

4 .99 4.99€

Auf Lager

1.Stil:Kupferblock


  • Material: Kupfer Die Größe ist 20 x 16 x 10 mm, nur kompatibel mit FDM 3D-Druckern, die mit Sprite Extruder oder Sprite Extruder Pro Kit ausgestattet sind, wie Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 und Sermoon V1 Pro 3D-Drucker
  • Diese Kupfer-Legierung ist sehr temperaturbelastbar, und wird nicht beginnen zu erweichen oder zu glühen, bis über 500 °C und ist somit perfekt für den Hochtemperaturdruck. Zusätzlich zu hohen Temperaturen verfügt dieser Block über eine fortschrittliche Nickel-basierte Beschichtung
  • Kupfer hat mehr als 3-fache Wärmeleitfähigkeit von Messing, und die von uns verwendete Kupferlegierung wurde gehärtet und behandelt, um die Oxidation zu reduzieren, die bei hohen Temperaturen auftritt. Die höhere Wärmeleitfähigkeit wird auch Ihre Aufheizzeiten leicht erhöhen und kann eine engere Temperaturkontrolle bieten.
  • Dieser Heizblock ist nur ein Upgrade für Sprite Extruder oder Sprite Extruder Pro Kit, um höhere Temperaturen zu drucken.
  • Lieferumfang: 1 Stück beschichteter Kupferblock


Nur kompatibel mit FDM 3D-Druckern, ausgestattet mit Sprite Extruder oder Sprite Extruder Pro Kit, wie Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 und Sermoon V1 Pro 3D-Drucker.


Jan
Bewertet in Deutschland am 26. Mai 2024
Passt alles, Maße, Schrauben, Gewinde, alles wie das original. Besteht aus vernickeltem Kupfer. Ob das dem Druck zugute kommt, kann ich nicht sagen. Ist auf jeden Fall weniger empfindlich gegen zu festes anziehen von Düsen. Die empfohlenen 2nm von Creality haben beim Alublock schnell zu defektem Gewinde im Block geführt. Hier nicht der Fall. Allein dafür zu empfehlen.
Ralf Jachol
Bewertet in Deutschland am 1. August 2024
Sehr gute Qualität
Scoobis
Bewertet in den USA am25. Juni 2023
plug and play al copper heat blocks. working great!
Adam M
Bewertet in den USA am13. Mai 2023
Great upgrade option for the sprite extruder. Beats the stock aluminum heater block for sure. Exceeded my expectations.
Cristina Higueras Martinez
Bewertet in Spanien am 10. Juni 2023
Los agujeros tanto del termistor cómo de la resistencia están al otro lado. Despúes no llegan los cables a los conectores y el calcetín tampoco sirve.En la descripción pone que es compatible pero después te encuentras con estos detalles. Inaceptable
JM
Bewertet in Spanien am 15. August 2022
Cobre recubierto, es pesado lleva su tornillo para la resistencia, es un poco caro, calienta a la misma velocidad que el original de aluminio, mantiene mejor la temperatura, por ahora las impresiones bien.
SocKeTPupPet 🤖
Bewertet in den USA am10. Mai 2022
It flows so smooth and heats up not too much faster than the aluminum one that came from the Creality factory. Once up to temp, it just maintains a smooth consistent toothpaste-like flow with ASA and ABS.Includes a grub screw for the heating element and a shouldered screw to keep the thermistor sensor in place. Don't forget to grab some boron nitride paste to help seal up the air gap around the hole in the block and the thermistor for optimal heat sensing performance. Boron nitride paste dries and hardens up, unlike CPU thermal grease, so don't use CPU grease. The factory comes with something similar in dried texture to the boron nitride.Side note: The factory thermistor may be difficult to remove, so if you don't want to risk damaging that one, get a few spares for the new heater block and leave the old one with the factory block. It took me awhile to chip away carefully to remove the thermistor without damaging it.This plated block is so pretty, I don't want to put any tools on it to mar it up... Get one, you won't be disappointed replaced the PTFE lined heatbreak/ heater block assembly to an all metal unit. I didn't have to bump the temps up at all with the BN paste, just make sure to let it get up to temp (the printer will do it on its own anyway), before it starts printing. Same conditions and settings just allowed for a very smooth and consistent flow. Like toothpaste......
Produktempfehlungen

41.19€

20 .99 20.99€

4.3
Option wählen

5.49€

1 .99 1.99€

4.3
Option wählen

19.99€

7 .99 7.99€

5.0
Option wählen