Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
● Ganzmetallkonstruktion, der Hauptteil besteht aus leichtem Flugzeug-Aluminium-Material, CNC-Verarbeitung, harteloxierte Antioxidationsbehandlung mit der Oberfläche.
● Die Klemme verfügt über drei 3/8-Zoll-Gewindebuchsen und vier 1/4-Zoll-Gewindebuchsen.
●Es ist kompatibel mit jeder Arca-Stilplatte, Kameraleisten und Mehrzweckschienen. Wie RRS, Arca-Swiss, KIRK, Wimberley, Markins, Sunwayfoto, Kangrinpoche, Benro, Sirui usw.
● Es hat eine Wasserwaage eingebaut, um sicherzustellen, dass die Fotografie präzise in horizontaler Ausrichtung ist.
● Die lasergravierte Skala auf beiden Seiten der Klemme für wiederholte Positionen.
Specifikation:
Material: Aluminiumlegierung.
Klemmöffnungsbreite: ca. 33–38 mm.
Gewicht:185g
Farbe: Schwarz.
DAVID W.
Bewertet in Großbritannien am 22. Februar 2025
Well priced item equally well finish. The finish and fit of this Arca fitment plate has a quality that fits in with my FX Impact mk2 rifle.
Jesper Seiergaard
Bewertet in Deutschland am 1. März 2025
Good quality, I have bought several of on my tripod heads and no my macro setup.
Customer
Bewertet in Japan am 25. Mai 2024
個体差なのか使用状況の差かはしりませんが、締めた状態から緩める時スッと緩みます。モノによっては少し力をかけないと緩まない（逆も然りで締める時最後に力をかける）クランプもあるのでどちらが正解なのか。とりあえず今の所しっかり止まってます。
ベンベン
Bewertet in Japan am 1. November 2024
しっかりと重みのある商品です。これからの使用が楽しみです。
McA Reviews Stuff Sometimes
Bewertet in Großbritannien am 9. Juni 2023
Maybe I haven't ran into the same issue or something but I personally really like this product. While the quality is not the highest, due to the screw that comes with it doesn't actually screw smoothly into the SmallRig tripod I've put it on. It bites right at the initial lock.. It's longer as well though so maybe the hex screw that comes with the Leftfoto one might be slightly bigger in size. I didn't want to chew up the ball head so I just used the slightly shorter one that came with the SmallRig tripod. It screws in fine and is stable so no worries there!It also has the correct sized cutout on the bottom for the ball head I have on it. Wide enough to slot on and stay put.The spirit levels on it seem to be accurate to my eye and in comparison with other products that have spirit levels so no issues there for me personally.The Arca Swiss mount works perfect fine! Locks in nicely. Seems to fit everything I have Arca Swiss shaped from the longer panoramic mouth to the Three Legged Thing L-bracket. Everything fits smoothly and locks nicely.The fact is has extra markings on gives it the edge to some competitors. Although the turn lock might be too close to some cameras but I haven't had an issue with the 3LT L-bracket PD as it bumps the height a little.For £24.99, actually a decent product barring the dodgy thread. I'm sure you could probably force it past or maybe I just got a bit of a dodgy one. But the ball heads that aren't for videos typically seem to come with one with the tripod anyway so just use that if you have an issue. You get an Allen key and that seemed to fit the tripods I've tried it on.So actually a pretty nice little upgrade. The extra wide is super nice to have and the markings are super nice to stick a panoramic extended on so you can centre the parallax point and have that extra bit of base for it to be secured with. More failing points in theory but as long as you make sure it's tight, I can't see a problem with it. Just always check your gear quality over time!
John
Bewertet in Großbritannien am 12. Juni 2023
I have been using the Arca Swiss type mounts on my tripods for many years in fact the one I had fitted to this tripod was quite a few years old and showing it's age but still gripped the camera tight, so I thought lets try this one out it's much cheaper than the one it's replacing but the build quality looks pretty good.I have a leveling base on the tripod so this clamp has to fit to that, the thread on the level is smaller than the tapped hole in the clamp but they supply a threaded insert which makes up the difference so it was just a matter of screwing it down, once fitted the only problem I had was that the old level was smaller and I have a small screw on the camera's fixing plate that stops the camera being slid to far, as this mount is wider the screw stopped me being able to center the camera on the mount but all I had to do was remove the screw and it was problem solved.I like the nice big knurled clamp screw it gives a good grip when tightening and it does hold the camera tight just like my old one so happy about that.It has two levels one in the knob and one on the base, personally I don't use them and just go by the in camera level as I think it's far more accurate.So overall I like this mount, I don't really use the measuring marks but they are on near all of these mounts and on this one nice clear and easy to read.As yet I can not really find any negatives it works for me.
Produktempfehlungen
