Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Artikelbezeichnung: XT60E-M Männlich Stecker Adapter Kabel.
Drahtlänge: 20cm / 7.87inch
Kabel: 12 AWG
Hergestellt aus Kunststoff und Metall, bietet eine solide und zuverlässige Verbindung.
Gewährleistet eine Verbindung mit hoher Stromstärke.
XT60E-M-Stecker kann mit XT60-Stecker zusammengesteckt werden.
XT60E-M Kabel wird für Modelle, Spielzeug, Fahrzeuge und andere Multicopter Hubschrauber in der Luft verwendet.
Wird mit Schrauben geliefert.
Paket beinhaltet:
2 * XT60E-M Männlich Stecker Adapter Kabel.
Cheng WY
Bewertet in den USA am28. März 2025
Not a xt60i connector, middle pin does not connect to anything.
James H.
Bewertet in den USA am24. März 2024
This kit comes with two XT60 male adapters each with 6" lead. The leads are very flexible and their coating feels like silicone. In addition, there are four small screws; two per adapter.Overall I'm pleased with this product. It has helped me complete my little project in which the leads of this XT60 connect to a solar charge controller and enabling me to connect solar panels to my project.
Travis Jensen
Bewertet in den USA am23. Oktober 2024
Everything is there. It looks like it will be perfect for my needs.
Riley O.
Bewertet in Kanada am 12. November 2024
This particular XT60i-F is not a true I-F and acts as a XT60. The centre pin is not connected to the ground pin so I had to solder it. Other than that connector is good quality
RaceNJason
Bewertet in den USA am22. April 2024
So I have a lot of the normal XT60 connectors and wasn't sure if the XT60I would work with them. Well I can say there was no problems connecting them together. I know they say the XT60I is rated for 100A and the XT60 for 60A (you'd think they would've called this an XT100 then instead), I personally can't visually see any difference other than the construction of the wires into the connector (and of course that extra metal tab on the XT60I which I think connects to the negative lead). These are definitely beefier on the termination of the wire into the terminal. But, I also make my own cables and have some with 12AWG wire so I would think they both could do 100A. Anyway...technically nothing I have pulls more than 60A at the moment so I'm good either way now. If you are pulling over 60A and don't bother with making your own cables this is definitely the way to go...
Produktempfehlungen
