Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDIY Fräsbohrer 6x85 (1)
spydermanbruce
Bewertet in Großbritannien am 3. Januar 2021
This does the job. I was having difficulty re-fitting the top header track on an old greenhouse door. I used it to widen the aluminium screw holes on the end roof bar - a delicate task - too much and I would have ruined the bar and the door header. However, after buying a set of new door wheels, the door was refitted. She owes me a tenner!
mohammed shah
Bewertet in Großbritannien am 1. August 2020
If making a screwdriver organiser in timber, make sure the drill bit you use is at least 1 size bigger then your screwdriver shaft or you will get a extremely secure driver that will make a horrible screeching when pulling it out of its slot!Spent a age looking for a good circular rasp to expand the holes I had made in a piece of lumber to organise my screwdrivers when I realised I could just buy this, in conjunction with my drill/driver to solve the problem in seconds, I'm not a woodworking pro or anything but i do have a hand reamer and this drill bit is far more effective.
PCS26
Bewertet in Frankreich am 13. Januar 2017
Je n'ai pas fraisé grand chose avec, l'usure est rapide, pourtant j'aime bien les consommables bosch, mais la c'est pas terrible faudra y mettre plus cher je pense pour avoir mieux...
SMG
Bewertet in Großbritannien am 17. Juni 2014
I occasionally need to adjust trims, lock keeps and similar on commercial doors and frames. 90% of the time its aluminium sometimes stainless steel. I bought and tested 4 items for where I could not use a saw or disk cutter (basically to avoid filing by hand):-1. 10mm x 20mm Single Cut Cylindrical Tungsten Carbide Bur Rotary File Bit - £5.53It does work well in 3mm thick aluminium (does not clog up too bad). However, one of the first uses was to put 4 "notches" in some stainless steel sheeting (each about 10mm x 10mm cuts in about 1mm sheet). I was not sure if the file would cope with stainless but I thought I would try it. It worked better than expected and made all 4 cuts (although taking some damage to the teeth in the process). However, it solved a problem for me and for the price I am quite happy. In fact I have ordered 2 more!2. Piranha 6mm Metal Cut Rasp Drill - £5.27Drill action works fine (well so it should) but the rasp action is poor for aluminium (teeth are too small and they clog). Actually works a bit better on steel (not what I want it for but thought I would test it). Will probably bin this one.3. Bosch 2609255304 6 x 85mm Rasp Drill Bit with Chisel Edge118 - £6.99Looks similar to the Piranha rasp mentioned above but works much better . Has bigger teeth and cutting edge is more prominent, this one will be added to my tool kit.4. Faithfull RRCYL 12 x 30mm Rotary Rasp Cylindrical - £2.75I was sceptical about this one, package says it will file non ferrous metal including Aluminium. I used a light oil lubricant and it cut very fast (initially I was very impressed) through aluminium that was a couple of mm thick BUT within a minutes use I checked the teeth and 5 or 6 were snapped off and probably half had taken significant damage. Tried it on wood - worked fine but it's not tough enough for aluminium. It's cheap and fast but wears out too quickly.
Produktempfehlungen
13.99€
6 .99 € 6.99€