Ihr Warenkorb ist leer
Ihr Warenkorb ist leer 12AWG verzinnter Kupferdraht mit PVC Nylonmaterial. Länge 50cm.
Mit niedrigem Widerstand, Antioxidans, Korrosionsschutz und guter elektrischer Leitfähigkeit, die stabilen Strom für Ihr Gerät bereitstellt.
XT60-Steckverbinder passen zu den meisten Solarmodulen und Batteriepacks, Solarmodule und Kraftwerke können einfach angeschlossen werden. XT60 ist ein Steckertyp für Hochstrom-Lithium-Polymer-Batterien, der bis zu 30A und 300V verarbeiten kann.
XT60 Verlängerungskabel leicht kompatibel zum Anschließen und Trennen der meisten Batteriepacks werden in tragbaren Kraftwerken, ferngesteuerten Spielzeugautos, UAV, RC-Batterie angewendet.
XT60-Stecker verwenden vergoldeten Stecker, Korrosionsbeständigkeit, Steckfestigkeit, bieten maximale Leitfähigkeit und Haltbarkeit, um stabile Stromübertragung sicherzustellen.
mike myr
Bewertet in den USA am9. Dezember 2024
I was able to put 100 watts at 19 volt from my anker desktop charger usb c to my anker 1000 watt hour power bank solar input.
William Price
Bewertet in den USA am5. März 2024
I don't write a lot of reviews as for the most part someone else has already done so. But in this case, there are very few reviews on this. I have a Ecoflow battery which has the ability to charge via usb-c as well as a DC input (solar, 12v), and regular wall outlet. But it only has a single usb-c port for in/out. So if I wanted to charge a device while keeping the battery charged all via usb-c, I can't. This cable lets me use the DC input, which is XT60. Note: Initially it did not work so I threw a meter on it and it was only showing 5v. Same result on several different usb-c chargers. But once I plugged it into an Apple charger the trigger seemed to activate and it now shows 20v on the meter. I went back to the previous chargers which were showing 5v and they now show 20v. So once the trigger is activated, it works and charges my Ecoflow battery. It doesn't quite hit 100W but that is probably the Ecoflow and it meets my needs fine.
Luciano
Bewertet in Italien am 23. Januar 2024
Avevo paura che usare più fili per una batteria che doveva passare davanti alla mia e-bike fino a dietro la ruota posteriore dove si trova la centralina potesse mandare in corto circuito.Mi sono ricreduto una volta provato il collegamento, perfetto, ma da vedere come si comporta anche sotto la pioggia.Consiglio l' acquisto
Peter Felecan
Bewertet in Frankreich am 21. November 2024
I cannot understand what's the usage of this cable. I imagined that it can be used to power a device which has an USB C connector, such as the Raspberry Pi from a battery. Convention wise and, consequently, electrical security wise, the consumer has an female connector and the power source a male connector; at least in RC usage. I should be more careful when ordering.Je ne comprends pas à quel usage est destiné ce câble. J'ai imaginé qu'il puisse alimenter un dispositif ayant un port USB C, tel que le Rapsberry Pi, à partir d'une batterie. D'un point de vue de la convention et de la sécurité électrique, le consommateur a un connecteur femelle tandis que la source électrique a un connecteur mâle; tout au moins dans un usage typique RC. J'aurais dû être plus attentif lorsque j'ai commandé.
Customer
Bewertet in den USA am11. Februar 2022
This is literally one of few that is on amazon.I had to risk that it might over voltage or over current and kill off my power adapters, my power devices and/or my usb multimeter. Not to mention, I have one power adapter that said to only output 19v instead of 19-20v. Taking careful connection each step, it appears that it... works. It works. It charges my PD devices. I'm quite happy with it because of it. 5 Stars.Buy it if you need this.
Produktempfehlungen
