Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktbeschreibung des Herstellers
RedLine VDE Combicutter3MAX T39071-3180
- Es streift, es biegt sich, es schert sich
- Zwei Komponenten, ergonomisches Design
- Rutschfestes Horn für Komfort, Kontrolle und Sicherheit
- Induktionsgehärtete Backen für hervorragende Langzeitleistung
- Schneidbacken mit C.K-optimierter Geometrie
- Speziallegierungsstahl, gesenkgeschmiedet, gehärtet und vergütet
- VDE-Zulassung – einzeln getestet bis 10.000 V für sicheres Arbeiten unter Spannung bis 1.000 V (EN60900)
C.K Redline Combicutter3 im Detail:
It Strips
Abisolierkerben - für müheloses und schadenfreies Abisolieren von 1,5 und 2,5 mm²
Es biegt sich
Drahtbiegeamboss - für schnelle und beschädigungsfreie Verdoppelung der Rückseite von Kupferdraht.
It Shears
Patress Schraubenschere - für beschädigungsfreies Schneiden von Patresse-Schrauben.
Stephen Kelly
Bewertet in Großbritannien am 3. Februar 2024
These CK combination wire cutters are excellent quality and extremely sharp. They were a little stiff when they arrived but a small drop of oil on the hinge soon loosened them up and they now operate perfectly.Fit nicely in the hand and offer very good protection as would be expected from C.K.The wire stripping grooves worked surprisingly well as did the wire bending anvil.These are quality wire cutters that I expect and hope will serve me well for many years.
Daniel Smith
Bewertet in Großbritannien am 25. Juli 2024
As an electrician I go through a fair amount of cable cutters / snips etc. These are excellent. They cut at 1.5mm or 2.5mm perfectly with cut in grooves on the blade for easy placement, and whilst the cable cutting action is good, the actually snipping action for basic insulation is perfect. I really enjoy using these and would highly recommend them to anyone thinking of buying top quality cable snippers
John
Bewertet in Großbritannien am 5. September 2021
These are probably the best cable cutters you will ever buy. Expensive but worth it. Very powerful cutting action so you have to be careful if using them to strip insulation as it is easy to misalign and cut the cable instead. I am not convinced by the wire bending notch as I still had to use pliers to finish the bend and squash it flat, so I stuck to that method instead.
silversurfer
Bewertet in Großbritannien am 15. Januar 2020
Brilliant pair of snips. I was cautious about the wire stripping holes not allowing me to cut cables off the reel in 1 go but it's perfect size. 2.5 TE is fine with room to spare on the blades... 3 core is the maximum these can handle imo which is fine for most installers.Stripping holes are very sharp. Do not squeeze tight as it will score the copper. when using the 2 copper stripping holes, also dont drag the snips along the copper to slide off the brown or blue sheath you have just strippedTerminating anvil is the main reason I purchased these snips, because previously 2.5 has always been a hassle to get completely folded over and flush for me.... these do a perfect job once you practice a bit....
Craig
Bewertet in Großbritannien am 14. Juli 2014
Easy to use, comfortable. Carry only this and a screwdriver up a ladder and you'll be happy.Limited uses, realistically 1.5 and 2.5 t&e only. For anything else the stripers and crimpers are not the right size to work efficiently. Cutter is 0.5mm too short to cut 2.5 t&e cable in one go.I do not expect the same service life as some other tools made from superior steel.Could benefit from a sharper outside jaw profile to allow better use as a reamer for removing sharp edges in holes in steel backing boxes.
Produktempfehlungen