Ihr Warenkorb ist leer
Ihr Warenkorb ist leerInternational products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Steve Fortier
Bewertet in Kanada am 13. April 2025
Work well for now. Remember that you need a special screw driver to get the old ide bracket out.
cesar allin parra lopez
Bewertet in Mexiko am 16. März 2024
Al principio no pude y no agarro, pero despues lo coloque en mejor posición hay que forzarlo un poco ya que su cable debe amoldarse ala placa pero con cuidado. Corre alguno juegos en modo turbo no se si se deba alo isos a este adaptador. Pero quedo perfecto y funciona excelente.
Alejandro
Bewertet in Mexiko am 28. September 2023
El artículo funciona tal como se describe. Calidad aceptable, fácil de instalar.
D S
Bewertet in den USA am25. Januar 2023
Good news here is there is a color guide included if you get lost, but the install itself is straight forward. The basic guide is to just start taking screws out until the inner cover comes off, then remove both the IDE data dn power connector boards. I found it best to remove the daughter board as well so I could get access to the ribbon cable on the back. (The daughter board just pulls straight up out of its connector, see my photos). The space where the IDE power connector is no longer used, but I put back the two screws for safe keeping. At this point you just connected the power connector from the IDE board to the new SATA board and do the same for the ribbon cable. Don't forget to take the two plastic spacers and put those under the new SATA board so it doesn't short to ground on the metal shielding. After that, just close it up and that's it. I plugged in a random 1TB drive I had lying around and happily got freeHDboot going. Supposedly a PS2 can detect up to 2TB. Oh, and it should be no surprise that your SATA drive will be operating at IDE speeds as we are just swapping the connector here.
Anderson Muniz
Bewertet in Brasilien am 8. August 2022
Funcionou perfeitamente no PS2 scph 5001 com hd sataII de 1Tb
Produktempfehlungen
