Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

DIYmalls 4.3' Zoll ESP32-S3 Display IPS TFT LCD Modul ESP32-8048S043C-I Kapazitiver Touchscreen ILI9485 800x480 ESP32-S3-WROOM-1 Entwicklungsplatine für Arduino IDE

Kostenloser Versand ab 25.99€

39.98€

18 .99 18.99€

Auf Lager
  • - Kombination aus ESP32-S3-WROOM-1 ESP32-Entwicklungsplatine + kapazitiver 4,3-Zoll-Display-Touchscreen (kein resistiver Touchscreen).
  • -ESP32-8048S043C-I ist ein 800 x 480 IPS-Display, höhere Auflösung als die meisten 480 x 270 TN-Displays.
  • - Laden Sie den Code über IDE oder esp32-Flash-Tool auf den 4,3-Zoll-Touchscreen hoch.
  • Unterstützt TF-Karte (kleiner als SD-Karte), nicht mehr als 32 G
  • - Kommt mit 1 x esp32 IPS-Display 4,3 Zoll, 1 x USB 2.0 auf Typ-C-Kabel 1 Meter, 1 x Dupont-Buchse auf 1,25 mm Draht.



Produktinformation

16x2 lcd display
1.8 tft lcd
1602 lcd display
3.2 esp32 display ips

me
Bewertet in den USA am20. Mai 2024
ESPHome does not support this board. I can't get anything to download to it from Arduino IDE. No documentation that even refers to this board. I'd suggest stay away and buy a more supported board. They could at least write one sheet with pin numbers for the display, and a link to one sample program.2024/08 UPDATE: Finally got this display working with openHASP and HomeAssistant. Would have spent MUCH less time if ANY documents were provider by seller.
Simon
Bewertet in Frankreich am 1. März 2024
Le produit a l'air top, les soudures sont ok, l'écran protégé, tout les câbles (SPI UART) sont ok. J'ai pas encore testé. Cependant j'ai reçu un câble USB/Micro USB. La carte a une alimentation en usb-c. Dommage. Je vais pas retourner l'article car ( j'imagine comme vous :) ) je dispose de plusieurs spare usb-c. Mais une meilleure attention lors du packaging serai top.
Produktempfehlungen

17.00€

8 .99 8.99€

4.3
Option wählen

12.08€

6 .99 6.99€

4.8
Option wählen

23.43€

10 .99 10.99€

4.3
Option wählen