Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
EPRONIC S8 Rückfahrkamera
Diese EPRONIC S8 Rückfahrkamera ist für die Rück-, Front- und Seitenansicht geeignet. Monitor/LCD/Bildschirm/Display/Radio ist nicht enthalten.
Diese EPRONIC S8 Rückfahrkamera ist geeignet für NTSC und AHD-1080P-25hz. Bitte stellen Sie sicher, ob Ihr Monitor kompatibel ist.
Wenn Sie diese Rückfahrkamera S8 an das Werksradio anschließen, bestellen Sie bitte den richtigen Kabelbaum und das Programmiergerät separat, um die Installation abzuschließen, da verschiedene Radios unterschiedliche Kabelbäume und Programmiergeräte benötigen, um mit ihnen zu arbeiten.
BALANT Philippe
Bewertet in Frankreich am 9. März 2025
Le produit acheté n'était pas compatible avec mes équipements mais le vender a fait le maximum pour trouver une solution.
MrZ
Bewertet in Italien am 8. März 2025
Montaggio semplice.Qualità dell'immagine buona ma non centrata.Per vedere l'immagine quasi dritta sullo schermo la telecamera deve essere montata storta ma non risolve il problema al 100%
Doug K
Bewertet in den USA am30. Januar 2025
I have ordered this camera in search of backup or front camera with a clearer and brighter at low light condition. Unlike other backup cameras I tested, this camera is encased in a weighty metal case with shiny black finish, and looks and feels like a very high-quality camera. It is designed to mount vertically facing down by drilling a hole and with washers and a nut, thereby looking down rear view in 45-degree angle. The mounting scheme doesn’t provide much of adjustability of camera angle once mounted.Most importantly, I was disappointed with the image quality, which is okay but a bit grainy not crystal-clear as claimed, and even grainier at low light condition.Manual doesn’t mention the purpose of the three loop wires, but these loop wires are mentioned in the product description page. There are three different control loop wires-white, green and orange. Its functions are:• If you need the parking guide line, cut the green wire/loop, if not, keep it• If you need the front view camera, cut off the white wire/loop• If you need the front view camera without parking guide wires, cut both the white and green wires/loopsAmong the three control loop wires, the purpose of orange loop wire was not explained. I assumed the orange loop wire is for either CVBS or AHD format selection, and it worked as I assumed. My CarPlay screen is AHD, therefore I left it uncut(default). Most backup cameras with loop control wires work instantly when disconnected or connected without powering down the camera, however this Epronic camera needs to power down after a change before it displays the changed mode.In summary, I liked the nice heavy-duty metal casing in this camera. For image quality and other considerations, this Epronic backup camera in my opinion is not as good as other cameras I have tested. I expected better performance considering its price.
Steve H.
Bewertet in den USA am14. Februar 2025
I got a replacement radio to put in my business cargo trailer. Once it arrived, I realized it had the ability to use a backup camera but did not come with one. So, I grabbed this one.It came with the camera itself, which is quite small (about the size of a die in a Monopoly game - or one from the Craps table at Caesar's, if that is more your speed!). It also had a video/power cable, plus an extension cable to get you all the way to the radio (total about 20 feet of cable - should be long enough for any vehicle).The instructions were a little light, but the short cable has an additional wire in addition to the yellow video RCA connector. That wire needs to be connected to an always-on 12v power source. That way, the camera is always running, even if it is not being displayed anywhere.Then, you run the video feed all the way into the radio head unit. One of the wires from your head unit should be attached to the signal that tells the radio you put the car in reverse. On most radios, that is a brown wire. Once the radio sees 12V on that wire, it will cut the screen over to display the camera feed.In my case, I am installing the radio in the cargo trailer to use as a portable office. I am installing the camera over the door. Then, instead of being connected to the reverse wire in the truck, I will connect the brown wire of the radio to a 12V source through a switch. To see who is outside, I just flick the switch and my radio screen shows the camera view. I essentially trick the radio into thinking I shifted into reverse!I have tested it and the camera has a great picture and wide field of view. I do get the "backup line" superimposed on the screen, since it thinks it is a backup cam still, but that's OK. Very happy with the video quality. As long as it lasts a while, it was worth it!Great little camera for the job. They shipped it with a little rubber duck in the box as a bonus. He's now hanging out in the trailer/office!
Produktempfehlungen