Hält bombenfest das Werkstück! Superschnelle Lieferung! Fairer Preis! Was will man mehr? Jederzeit wieder!!!DANKE

Half the price of similar offerings of branded products. Easy to adjust and use. Have used Milescraft before and have been satisfied with their quality

Ich bestelle aller Art Werkzeug für einen Kollegen, der ist zufrieden damit !Der Preis ist hier unschlagbar….absolut empfehlenswert, gute Qualität !!

Gereizt haben mich die 150mm Spann-Abstand an der Bankklemme . Diese macht einen grundsätzlich soliden und funktionellen Eindruck wobei das qualitative Level auch nicht zu hoch angesetzt werden sollte. Die Klemme wird ohne Zubehör geliefert, je nach Verwendung muss nachgekauft werden. Die MFT-Ergänzung (3/4" bzw. 20mm) ist ganz brauchbar. Bei der Verwendung der Bankklemme mit Basisplatte und T-Schraube auf einer Alu-C-Schiene, eingeklebt in Multiplex und kurz verschraubt, ist die Hebelwirkung trotz vorsichtigem Einstellen einfach zu groß > Aluschiene verbogen / rausgerissen. Bitte bedenkt vor Kauf Eure Verwendung.

Its well built, sturdy and value for money. It has a nice crank you close the clamp slightly and turn the crank a bit thightens well and reverse for soft opening. One can use the lever like normal vise grip too. In my experience it is better than auto type with more than twice the price! The bolt underneath is 5/16-18.

Que buen agarre con las bases hace mucho

I feel the first two reviews on this product are unjustified. The first reviewer said it doesn't have clamping power, but I'm wondering if the user knows how to use the tension knob. Because I have this clamp side by side with the Kreg version and this thing clamps just fine. The other review complains about not having a base, which is not a review of the product. These bench clamps are known to be sold without bases, the product picture even shows NO BASE.Anyway, lets get on to the clamp. The bottom of this clamp is identical to the Kreg's version. They both use 5/16-18 bolts. This means you can use the Milescraft clamp with the Kreg base, or you can use the Kreg's clamp with the Milescraft base. The Kreg base is called the KBCBA Bench Clamp Base, and the Milescraft base is called the Milescraft 4016 Benchlock. Both of these bases can be found on Amazon. Alternatively, they slide on universal t-tracks as well.The one advantage that Kreg has is that their clamp has "automaxx" technology, which means no adjustment necessary when you're changing boards with different thicknesses. With the Milescraft, it's a little more old school. If you change board thickness, you'll need to adjust the tension. But it's really easy, as you can see in their stock photo, there is a crank in the back of the handle. Through the years, I don't recall many times where I worked with different thickness boards on the same day. Usually when you're joining boards, most of the time, we're joining boards of the same thickness. Nevertheless, that is something to think about, if you really want "automaxx" then you'll have to pay a premium. I should mention releasing the hold feels easier on the Milescraft. To release, you'll need to pull up the top handle on the Kreg version, it will take some effort especially if you've tensioned it for a very strong hold. With the Milescraft, the release is as simple as squeezing it's built-in clip located in the upper handle. When I set both clamps to similar tension, the release takes less effort with the Milescraft. Here's the current cost breakdown for the two sizes combined with the bases sold separately. And remember, you can mix and match. You can buy a Kreg clamp and use it with the Miles craft base, and vice versa:6 inch:--------Kreg: $40 + $23 = $63Milescraft: $27 + $10 = $373 inch:-------Kreg $43 bundledKreg $38 + $23 = $61... so why not buy the bundle?Milescraft $23 + $10 = $33I'll review those bases mentioned above in different reviews. For the price and quality, Milescraft sells a great clamp. As you can see by the price breakdown, you really need to think long and hard if you truly need automaxx.

This prouduct is no good to me with out base plate I’ve looked to see if it’s on sale but only kreg sell them so I will to return it no good sending clamp with out it