Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Entwicklungsplatine mit USB-Kabel
beschreiben:
Es handelt sich um ein leistungsstarkes Entwicklungstool, das für eine Vielzahl von DIY-Projekten und professionellen Anwendungen geeignet ist. Der Mikrocontroller des Motherboards bietet überlegene Rechenleistung und Stabilität. Der integrierte CH340G-Mikrochip sorgt für eine nahtlose Verbindung mit dem Computer und macht die Programmierung und Datenübertragung für Benutzer bequem.
Parameter:
Arbeitsspannung: 5V
8 analoge Eingangsanschlüsse: A0~A7
14 digitale Ein-/Ausgangsanschlüsse: TX, RX, D2–D13
6 PWM-Anschlüsse: D3, D5, D6, D9, D10, D11
1 Paar serielle Transceiver-Ports mit TTL-Pegel: RX/TX
Maximale Taktfrequenz: 16 MHz
Hauptprozessor: AVR
Programmspeichertyp: EEPROM, FLASH
Verwendung:
1. Laden Sie die IDE-Programmiersoftware herunter
2. Laden Sie den USB-Chip-Treiber herunter
3. Legen Sie die Nano Karte ein und der Treiber wird automatisch installiert.
4. Wählen Sie in der IDE die Registerkarte NANO.
5. Wählen Sie den COM-Port aus und schließen Sie die Nano Karte an diesen Port an.
Eduardo
Bewertet in Spanien am 12. März 2025
De momento todo correcto, se programa igual que el modelo original. Veremos la duración.
Reed
Bewertet in den USA am8. Dezember 2024
Overall it seems to work fine with no issues but I can’t figure out what the I2C pins are for. There are 3 images on the selling page and each of them are showing different pins for the SCL and SDA pins and idk which is right if any of them are since non of the configurations seem to be giving me any feedback from the device I’m trying to get info from. I know the other device is fine because it works with my arduino uno board, just not this one
Ralph
Bewertet in den USA am4. Oktober 2024
This was my first time using the Nano V3.0 clone board, and I had a bit of trouble getting it to communicate.For me, I had to install the windows CH340G driver to get this board to communicate and it appears to be generic in general. The board doesn't identify itself as anything.Aside from that woes of getting started on this project, the board appears to operate normally and accepted my code without too many troubles. I've mostly programmed ESP series boards due to their faster processor speeds and wireless communication, so this one seems a bit in the stone age for me. Don't let that deter you if you enjoy the Nano boards. They are great for use with simple sensors and projects, but don't expect wireless communication.Overall, the listing was very clear it was a Nano clone using the CH340G chip. I actually like that it came with a good data transfer cable. This makes the job of programming it much easier when you have the right cable. I recommend giving this one a shot as long as you know what you're getting with this product. Again, I wouldn't recommend this one for beginners as this one requires a little bit of know-how.
EasTrader
Bewertet in den USA am21. Oktober 2024
When getting a device like this, the FREE reviews are not helpful as Arduino has many variations and this is a "copy" of their design. Which means they have ALMOST gotten it like the original. When you need to program it, since it is different, you must select the RIGHT programmer, which the seller fails to mention.The tech specs are great, everyone needs that, but the next step is missing.
H. F.
Bewertet in den USA am1. Dezember 2024
This is your basic “Nanoid” clone.I personally don’t care for the CH340 comm chip set and try to avoid it when possible; I’ve run into issues getting this to work with certain version of Linux.
Produktempfehlungen
10.59€
4 .99 € 4.99€
34.21€
15 .99 € 15.99€