Ihr Warenkorb ist leer
Ihr Warenkorb ist leerFrank J.
Bewertet in Kanada am 4. August 2024
Good product. Seems sturdy and strong. Very easy to install and feed rope through. Installed 1 week ago and so far so good.
Jörg H.
Bewertet in Deutschland am 9. August 2023
Vom Prinzip in Ordnung, aber als Fahrradlift nur bedingt geeignet!Die Haken sind für Fahrräder mit Anbau am Lenker(Klickfix,Tacho etc.)zu eng,unbrauchbar. Hier wäre ein zusätzlicher Arm mit Gelenk hilfreich um die Aufnahme in der Breite zu vergrößern.....
Alpbachhuber
Bewertet in Deutschland am 10. April 2022
Beim dritten Mal benutzen um das E-bicke zu reinigen ist der Aufnahme Haken abgebrochen. Aluguss erweist sich als nicht geeignet.
Huw
Bewertet in Großbritannien am 8. Mai 2021
The metal main metal parts are very good. Unfortunately the first time we used it the rope frayed. We replaced the rope with a higher quality sailing rope which we have routed over the pulleys without using the locking mechanism. We have fixed a more robust cleat to the garage wall and use this instead of the locking mechanism. The light weight cleat provided is used to hold the spare rope. We are also using a short bunge to connect one of the pulleys to the handlebars because the fitting provided is not big enough to attach to the handlebars securely. This arrangement seems to be working well for lifting up my wife’s electric mountain bike when I am servicing it etc.
J.B.
Bewertet in Deutschland am 4. November 2021
Der Seilzug ist Schwer zu bedienen sehr wackelig
Stube 99
Bewertet in Deutschland am 22. August 2021
tolle Sache, schon mehrmals gebraucht. Endlich kann ich mein Fahrrad im stehen reparieren.
SMc
Bewertet in Australien am 12. Mai 2021
The product is well made and installs easily. Some reviews claim the installation screws provided are not good enough, but they were OK for me - maybe they have been upgraded? The screws work well for the given load as long as the installer drills a pilot hole that has the same diameter as the root diameter of the screw - but that is always good practice.Better instructions for how to thread the rope through the auto lock device would be useful, but I finally figured it out. I do think that the auto lock mechanism might wear the rope prematurely, so keep an eye on the rope condition.
Gadget Geek
Bewertet in den USA am11. Januar 2021
This is a good device to get your bike up off the floor of your garage or workshop. If you want to hoist the bike so that it sits above your head, you’ll need at least 4½ feet of clearance between the top of your head and the ceiling above.The lift is very sturdy and easy to put together. The rail has five mounting holes: two on each end and one in the middle. Since you’ll be tugging on this to lift your bike (or equipment), you’ll need to ensure you securely mount the rail. If you can’t screw the rail along an overhead truss, I recommend using plastic toggle anchor if mounting it on a drywall surface that spans two trusses. Two of the end holes are 24” on-center, so you should be able to anchor at least two screws into trusses. If mounting to a bare overhead (exposed trusses), use a mounting board the same length of the rail. Also, if you’re mounting it to trusses that ascend, but the rail runs perpendicular to the ascent, cut a wedge the length/width of the rail to compensate for the angle, allowing the lift to sit parallel to the floor.The cam/catch mechanism seems a bit flimsy, but it works. Although it hangs up every once in a while, it keeps the load securely overhead. The kit comes with 50 feet of black rope, but it had too much stretch for my liking, and it didn’t finish well when cut and heat sealed. I replaced it with a 3/16” (5mm) static climbing accessory rope. For a 12-foot overhead, I needed 30 feet of rope.The double pulley system allows you to raise the bike and maintain the two lift points parallel to the floor (with a load). I mounted my tie-down cleat at about 3.5 feet off the ground, but if you have the room, I recommend mounting it just about shoulder height. This allows you to hang the coil of excess rope on the cleat without it getting in the way of items on the floor.Pros:- sturdy build- easy to assemble- frees up valuable floor spaceCons:- low-quality rope
Juan Manuel De Anda Romero
Bewertet in Mexiko am 24. Januar 2016
El producto es bastante bueno para su precio. Las poleas son un poco chicas y la cuerda tiende a salirse mucho de ellas. Es facil armarlo pero no instalarlo. Los tornillos con los que viene no son tan de buena calidad (3 se me doblaron y uno se le rompio la cabeza). Tampoco trae taquetes. No trajo instructivo pero se puede encontrar el pdf si lees las reseñas en inglés.Fuera de eso. Es un excelente producto. Se monta muy faciles los ganchos y no se ve de mala calidad ningun componente.El servicio de entrega llego mas rápido de lo esperado.En general cumple con su cometido y su precio es ideal.
Produktempfehlungen
