Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktbeschreibung
Seit dem ersten Tag haben wir die Audio-Revolution des Autos angeführt. Nichts hat sich geändert. Rockford Fosgate bleibt der weltweit führende Anbieter von Audio-Innovation und Ihre Leidenschaft ist unser Ziel. Wir entwerfen die besten Audiosysteme für Ihren Lebensstil
Amazon.de
Rockford Fosgate has always delivered the "punch" and the dual-voice-coil P2 10-inch subwoofer is no exception. Kevlar fiber reinforced paper cones kick out bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring, and an optional grille insert is also available.
Rockford Fosgate Punch Series Subs
Featuring innovative parabolic cone designs, oversized surrounds and large motor assemblies, Punch subwoofers deliver deep, loud, aggressive bass--not to mention stunning cosmetics that you'll want to show off. For over 20 years, Punch subwoofers have shown the world that big bass, extended power handling and awesome cosmetics need not cost a fortune. One listen and you'll know why it's called The PUNCH.
P2D4-10 Features
Punch subwoofers deliver deep, loud, aggressive bass and feature flex fit baskets for easy adjustments when mounted. Anodized aluminum voice coil formers provide excellent heat dissipation.Speaker Construction
- Custom 10-AWG nickel plated push terminals
- Diamond cut cast aluminum trim ring with optional grille
- Dual linear spider with embedded 16 AWG tinsel leads
- Extended pole piece and bumped vented backplate
- High-temp voice coil with spun-laced Nomex re-inforcement collar
- Kevlar fiber reinforced paper cone
- Protective PVC textured magnet cover
- StampCast basket with integrated spider venting
Anodized Aluminum Voice Coil Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.
Flex Fit Basket
The Flex Fit frame utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer.
These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.
"VAST" Surround
The Vertical Attach Surround Technique significantly increases a speaker's effective radiating cone area without complicated installation issues. The result provides up to 25% more effective radiating cone area for the same model speaker.
About Rockford Fosgate
Setting the standard for excellence in the audio industry, the Rockford Corporation markets and distributes high-performance audio systems for the mobile audio aftermarket and OEM market. Headquartered in Tempe, Ariz., Rockford Corporation is a publicly traded company and manufactures its products under four brands: Rockford Fosgate, Rockford Acoustic Design, Lightning Audio and InstallEdge.com.
P2D4-10 Specifications
Size: 10 Inches Impedance: Dual 4-Ohm Power Handling: 300 Watts RMS
600 Watts Max Voice Coil Diameter: 2.25 Inches Magnet Weight: 62 oz. Speaker Connector: Dual 10 AWG compression SPL(1w/1m): 84 dB Woofer Displacement: 0.052" cu. ft. (1.47 Liters) Cutout Diameter: 9.125 inches Mounting Depth: 5.92 inches
What's in the Box
Rockford Fosgate Punch P2 P2D4-10 10-Inch DVC Subwoofer (Dual 4 Ohm), Painted Aluminum Trim Ring, Installation Hardware, User's Manual
Customer
Bewertet in den USA am1. Mai 2024
GOOD ITEM WOULD USE AGAIN
Robert Nungester
Bewertet in den USA am24. Juni 2023
I purchased one of these to go with a Memphis 5 channel amp that puts out 400w to the sub channel and mounted the sub in a custom fiberglass enclosure that is right at the minimum required air space. Right at .6 cubic ft and this sub sounds fantastic! I've been building car audio systems for over 20 years and have installed and listened to just about every subwoofer out there and I have to say that this sub performs with the best of them. It puts out the bass of a high end 12" woofer and would honestly imo out perform two mediocre 12s. Not to mention this sub looks fantastic when installed. I would definitely recommend it.
Van Life Geek
Bewertet in den USA am22. November 2019
I installed this in my camper van over four years ago and am very happy with it. It gives me the punch I love and I swear it sounds better over time. It really compliments my sound system. I do wish it came with the cover screen, which I think is necessary for protection, at least in my application.
Customer
Bewertet in den USA am26. Dezember 2017
Love this sub!!! Got it in a sealed single sub box with a 1200 watt mono-block amp kicking the snot out of it. Also a nice Pioneer head unit. Sounds amazing!! I listen to a lot of EDM and stuff thats very bass intensive, so i really put rhis thinf through the rigors! Accidentally blew my first one (definitely due to clipping the input of the amp) and immediately reordered a replacement. Had people comment that it's louder than people running 2x12" which it absolutely is!!!! 😁😁😁😁
Zeke
Bewertet in den USA am26. Dezember 2012
Great subwoofer, it exceeded my expectations. At first I installed it inside an Atrend sealed Bbox, which is. 85 cubic feet and within Rockford Fosgate's specifications, it sounded ok since I installed it inside my trunk. However, I wanted more bass using the same sub so I opted for a ported box instead. Thus I purchased a Sound Ordinance box from Crutchfiled. It has 1.4 cubic feet of internal volume the recommended space from Rockford when using ported boxer. This box was the only one with the correct internal volume I could find in the internet.Once I installed it, wired it, and played some music, I immediately noticed the difference. The P2 hits harder and with longer deeper bass notes I can now feel inside my car. My Alpine amp is tuned to the same settings as with the sealed box, but the sub is louder, because power efficiency is better achieved with ported box.So long story short, if your mounting this sub in a sealed trunk like mine separated from the passenger compartment go ported with the recommended internal volume. If you however, drive a wagon like a Scion Xb or something similar, a sealed box will hit hard and you'll feel and hear it. I recently installed a 10 inch P1 in my wife's Xb using my old Atrend Bbox powered by an MB Quart 400 watt rms monoblock and it sounds stupendous.Well I hope this helps and you are able to come a conclusion about your purchase and how to install this great sub based on your application.
Produktempfehlungen
