Ihr Warenkorb ist leer
Ihr Warenkorb ist leerZum Erstellen von Falzen bis zu einer Breite von 38 mm. Verstellbarer, auf zwei Führungsschienen laufender Anschlag. Schienen lassen sich auf die andere Geräteseite schieben, so dass der Anschlag auf der rechten oder linken Seite verwendet werden kann. Das Doppelpositionsmesser erweitert die Vielseitigkeit des Hobels zusätzlich.
Berny
Bewertet in Frankreich am 27. August 2023
Rénovation de volets . Très efficace après une prise en main rapide.
Giorgio
Bewertet in Italien am 18. Juli 2023
la pialla essendo in metallo si presenta con buone rifiniture, maneggevole, ha una buona impugnatura, da verificare il taglio
Petar
Bewertet in Deutschland am 2. Februar 2022
For this price I did not expect some higy quality and to perform right of the box but this tool has major fault in the production. Blade is not sharpen to any grit, it has few nick in the edge and it is 1mm thinner than the plane sole so you can not cut full size rabbet as sole will ride on the wood. Blade is also poorly made so you can not protrude blade far on the side and you can not make sharp corner cut. Blade depth adjustment is poorly made and it is protruding 4mm in the iron bed so blade is not in contact with the bed. Iron bade is rough and full covered with junk of paint so iron is rocking on it.Nicker for cross grain cutting is in reality only screw, there is no any nicker blade so you can not use it for cross grain cut. I have replace this with marking gouge disk blade and smaller screw but it is noSome thing you can repair and get it to cut, but overal it will never perform as it should. After few hours grinding sole and the side and repairing depth adjustment, I manage to get decent finish and straight sole and some performing. I don't recommend this to anyone, only if you have machine shills to repair it.
Ognjen
Bewertet in Deutschland am 30. Juli 2021
For such price, don't expect it to be ready for work out-of-the-box. Biggest issus were that:- depht adjuster leaver for iron is at least 4mm proud of the frog, causing the iron to rest on it- cross-grain cutter is not exactly tool-steel material (at least it seems very soft) and is not exactly placed at the edge of the sole (it is placed too deep in the side of the plane).Iron adjustement issue is not impossible to fix, and once that was sorted, I got it to cut with the grain.I guess if you don't mind spending some time to tune up, and you are not willing to spend more on reabte plane, go for it.If not, consider more expensive alternatives, assuming they don't have same or similar issues with a higher price tag...
Reinhold Szczyra
Bewertet in Deutschland am 13. Februar 2021
Die wichtigen Funktionen des Hobels sind so schlecht ausgeführt das eine Benutzung nicht möglich ist.
Fabrice
Bewertet in Frankreich am 4. Juli 2019
Un rabot qui fonctionne bien à condition de rectifier les surfaces du corps de façon à ce qu'elles soient planes et d'équerres, ce qui n'est pas le cas à la réception, et de bien affuter le fer. Cela n'en fait pas un super outil, mais un outil fonctionnel pour moins de 30€. La rectification est rapide avec une ponceuse stationnaire, par contre à la main, il faudra s'armer de courage.
martin höft & jessica höft
Bewertet in Deutschland am 16. September 2019
Das Bild entspricht nich der Wahre, nach ca. 1 Stunde herrichten ist der Hobel zu gebrauchenHobel funktioniert gut
Glenn P.
Bewertet in Großbritannien am 27. Mai 2018
I'm very happy with this purchase. The plane i received was not exactly as pictured, it was better, being black painted and had the two bar fence guide so less potential movement. Great plane for the money, sharp blade and usable out of the box once adjusted correctly. Best though to clean, set up and hone the blade further.
xxl
Bewertet in Spanien am 18. Juli 2017
Esta muy bien, la guia esta bien ajustada, en la otra cara del cepillo lleva una pequeña cuchilla que corta la madera para impedir desgarros.En general una buena relacion calidad precio
Produktempfehlungen
