Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Simthread No-Show-Mesh-Stick-Stabilisator-Rückseite.
Die unsichtbare Stick-Stabilisator-Rückseite besteht aus starkem Nylon-gesponnenem Polymesh-Material, das eine dauerhaft stabile Rückseite für Stickprojekte bietet.
Es wird empfohlen, für Brust-Logos, Poloshirts, T-Shirts, Mikrofaserbekleidung, Stretch-Stoffe, Seide und Satin zu verwenden.
Simthread bietet mehrere Auswahlmöglichkeiten, um Ihre unterschiedlichen Anforderungen zu erfüllen:
Mittelschwer, 55 g, 20,3 x 20,3 cm, 100 vorgeschnittene Blätter, passend für Stickrahmen der Größe 10,2 x 10,2 cm.
Mittelschwer, 55 g, 25,4 x 30,5 cm, 100 vorgeschnittene Blätter, passend für Stickrahmen der Größe 10,2 x 10,2 cm, 15,2 x 15,2 cm, 12,7 x 17,8 cm.
Mittleres Gewicht 55 g, 30,5 cm x 9,1 m, 1 Rolle, je nach Bedarf in variable Größen geschnitten
Washington
Bewertet in den USA am8. September 2024
The cutaway stablizer no show mesh is great. I used it on t-shirt. It's softer than the non-mesh type. And it did stablize the fabric. The embroidery result is good.
Moshe Jacobson
Bewertet in den USA am30. August 2024
This is a great no show mesh stabilizer. I like using this on thinner fabrics, so the stabilizer doesn't show through. Its of course then also a little less "stiff" but worked great!
HalDIY
Bewertet in den USA am26. August 2024
This is a great stabilizer for mid-weight fabrics that need a medium amount of support. I used it to make a new mini-quilt for Valentines Day and had mixed success, but mostly because I tried to use it on a very lightweight fabric that really needed more stabilization. I used a different cut-away mesh from my local sewing center for one of the blocks and had the same result, so the issue was more with the fabric than the stabilizer. The Simthread mesh is rather soft and was comfortable to work with. It flexed with my fabric, which made it a bit easier to hoop. I used two layers, so it was still a thick set of fabric to get into the hoop, but I did find this easier to work with than paper-based stabilizers. It cut away easily and didn't feel too bulky when it was time to add batting and backing to quilt the finished design. Overall I'm very happy with this product and will just know to use it on traditional cotton or other mid-weight fabrics that don't require extensive stabilization.
Raquelle19
Bewertet in den USA am23. September 2024
I used this to stabilize logos embroidery on a light-mid weight button down shirt. I found myself needing to use a second layer of thicker tear away stabilizer to firm things up. However, I should note that my machine is an industrial that operates at higher RPM's and does not have support under the frame like a home machine. This stabilizer does have a nice, light feel to it, and does not show through garments.
123Ruby
Bewertet in den USA am20. August 2024
I can always count on Simthread for great stabilization for all of my embroidery projects. This no show mesh is GREAT! It feels great and performs very well. This stabilizer backing is made of strong nylon polymesh material that provides permanent stable backing for most embroidery projects (can be doubled for dense stitchouts). When using this product, I get great results and no puckering.
Produktempfehlungen
