Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Hauptmerkmale:
1. Erster formschlüssiger Käfig auf dem Markt für Canon R;
2. Eingebaute Schnellwechselplatte für Arca-Standard auf der Unterseite;
3. Mehrere 1/4"-20 & 3/8"-16 Gewindebohrungen und Positionierungsbohrungen für AR-RI-Standard;
4. Eingebauter kalter Schuh auf der Oberseite mit Anti-Off-Design;
5. Anti-Twist-Design und Gummikissen, um Wackeln zu verhindern.
Kompatibilität:
Für Canon R
Paket beinhaltet:
1 x Käfig
Produktabmessungen: 153 x 109,5 x 55 mm
Verpackungsabmessungen: 200 x 140 x 55 mm
Nettogewicht: 163g
Paketgewicht: 247g
Material(e): Aluminiumlegierung
Boban
Bewertet in Deutschland am 22. Januar 2025
Nice product. I reccomend.
Edu Martin
Bewertet in Spanien am 2. April 2025
Casi perfecta, pero cuesta un poco llegar al boton de encendido apagado de la camara. Es una circunstancia menor... y no es motivo de valorar negativamente esta carcasa que es espectacular.Muy recomendable
Lu87
Bewertet in Italien am 16. Mai 2024
Perfetta per Canon EOS R.
Duy Le
Bewertet in Deutschland am 13. September 2023
Sitzt sehr gut und ist super verarbeitet. Hat noch Platz für externes Licht sowie Mikrofon.
fpatricka
Bewertet in Spanien am 2. April 2023
Se adapta perfectamente a la Canon EosR
TechEnthusiast
Bewertet in Großbritannien am 1. Mai 2022
The manufacturing on this cage is insane.I literally looked at every angle of this cage once fitted on my EOS R and I was concerned it was touching the camera and scratching it.After looking at it more closely I've found this cage is so perfectly manufactured and designed it's almost a second skin for the EOS R!Literally the tolerances are so narrow the if you look closely you can barely see a microscopic gap running under the cage in some areas.Incredible job by SmallRig!The caged is fully anodised, CNC machined from a full block of aluminum (no screws to connects any parts to each other).You can find 3/8 and 1/4 on the bottom, Arri locating pins attachments on top, both sides.The cage is extremely sturdy although on very heavy setup (3.2KG), there's a slight normal flex (away from the camera luckily, due to top handle) on the top part of the cage.But it's a very heavy setup: Atomos Ninja V, FXLion Nano One VMount battery, Canon 35mm 1.4, Viltrox Speedbooster, SmallRig baseplate with 15mm rod holes and so on.The bottom part of the cage is compatible with other Smallrig accessories.One thing that disappointed me a little bit it's the Arca compatible bottom. It doesn't fit my DJI RSC-2, forcing me to find a solution to quickly switch between gimbal and handheld (and maybe even monopod/tripod).I've tried a Manfrotto compatible Smallrig plate for the RSC-2 but it didn't fit for some reason, despite being advertised as compatible.I've attached few pictures of some layout/setups I've tried so far with this cage.A better 1/4 holes layout on the top would have been more beneficial for me. I would have ditched the Arri Locating pins and hole as I don't use it.I managed to fit a HDMI clamp from Smallrig, even though it's advertised as compatible with Sony cameras cage.Weirdly, hat there are no dedicated HDMI clamp for this cage!I've attached some pics of the rig. This was before cable management and also the HDMI clamp arrived today, I've fitted it everything stripped down.Hope this will help!
Ralf S.
Bewertet in Deutschland am 16. Oktober 2021
passt wie angegossen und verbessert die Handhabung der R um Einiges, SUPER !
Ross Jukes
Bewertet in Großbritannien am 13. September 2019
Die Medien konnten nicht geladen werden.
Produktempfehlungen
39.00€
17 .99 € 17.99€