Ihr Warenkorb ist leer
Ihr Warenkorb ist leerTruvativ innenlager "powerspline", 108 x 68, nicht kompatibel, aluminium schalen
Tobias B.
Bewertet in Deutschland am 7. August 2023
Im Titel stehen 118mm, geliefert wird das Modell mit 108mm. Da ich sie auf Lager gekauft habe und es erst jetzt beim Einbauversuch gemerkt habe kann ich sie nicht mal zurück. Daher für mich völlig unbrauchbar und aufgrund der falschen Anzeige nur 1 Stern.
村岡ミノル
Bewertet in Japan am 28. Februar 2022
I was saved because I couldn't get it in Japan.I appreciate it very much.
L.W.
Bewertet in Deutschland am 4. Mai 2019
Nach etwa 1200km kaputt.
Chris S
Bewertet in den USA am26. Januar 2019
I ride a fixed gear bike 20 miles daily commuting. This bottom bracket holds up to some pretty gnarly abuse. Spins fast, spins true, and lasts. A perfect fit for my 88' Nashbar which is a strange bottom bracket size, this aligns my chain ring to my rear wheel exactly. I ride year round so this gets a lot of debris, salt and grime sprayed into it. The sealed bottom bracket keeps the bearings spinning smoothly year after year. Since I ride fixed I put a lot of strain on my bottom bracket since I use it for breaking and track standing. This holds up to power slide stops and slowing down/speeding up on a dime. I normally get 2-3 years out of these bottom brackets and when they're done I happily buy another because they're solid work horses.
David Hicks
Bewertet in Kanada am 28. April 2019
This is the same model that was on my bike (2009) which was getting a little chewy/rough - I think the bearings got some water in them.This was a pretty cheap and easy replacement, just remove pedal cranks, unthread (anti clockwise!) the bracket and replace. Hopefully good for another 10 years. Also includes a set of crank arm screws.
snailmartyr
Bewertet in den USA am1. Februar 2014
I don't know why some people are reporting that these bottom brackets aren't durable... I hope they haven't started making these on-the-cheap.I have had to switch all my bicycles from cartridge bearing bottom brackets to loose-bearing models because I'm always burning them out in a matter of weeks. The newer outboard cup models are the worst of all. No matter the brand (Campagnolo, Shimano, SRAM, and numerous no-name models) the cartridge bearing design just seems flawed.The exception has been the Truvativ Power Spline bottom bracket. I've gone through two in eight years. I use these on my commuter fixed-gear bicycle that I use a minimum of 75 miles a week - rain or shine. The first one gave out after three years or so back when I was using the fixed-gear for commuting and training and I went through about a dozen rain storms that year. I was putting in 150 miles a week for 2 of those three years. A slight clicking noise finally cropped up. I could soak the unit in motor oil, then let it drain and it would be good for another week or so... but I finally just changed it out.I recently bought a new fixed-gear frameset and decided to replace the old Power Spline with a new unit... the old one is still fine, it just didn't want to thread into the frameset's bottom bracket shell easily and I had a new one in the shop.The Power Spline is a proprietary design by Truvativ (now owned by SRAM I take it, based on the labeling of the new one I just ordered so that I have a spare on hand)... so it isn't ISIS... it's more tapered looking. The whole Power Spline concept never really caught on (sort of like Shimano's Octalink... yep, tried that one as well), so it's unclear how long they'll keep manufacturing them... but you have to use a Power Spline crankset with these.As others have mentioned, these aren't anything special to look at. They are not particularly well sealed or ultra-smooth turning out of the box... but in my experience, they have proven very durable and that has made all the difference.
Roberto C. Olivera
Bewertet in den USA am5. Dezember 2013
Heres the thing, this is a discount bottom bracket so you know the quality and craftsmanship can be somewhat unreliable. I ride a mercer kilo TT and have gone through 4 of these bottom brackets. When I rode single speed this bottom bracket held up quite nicely for several months. But when I switched to fixed no brakes I noticed I had to switch out this bottom bracket at least every 3 to 4 months. One only lasted me 2. For a bottom bracket that is 20 bucks I don't mind switching it out within these time frames. Just as an FYI this bottom bracket is an ISIS bottom bracket if your looking to investigate into a better quality one. However I have heard very mixed reviews about ISIS. If you want a real reliable BB you might want to switch to Shimano but that might require you to switch out your crank set. Hope this was helpful.
ich
Bewertet in Deutschland am 26. August 2013
Nachdem mein altes Truvativ nach über 1000 km den Geist aufgegeben hatte, habe ich der Versuchung widerstanden ein anderes Produkt einzubauen. Lieferung wie immer superpünktlich. Verpackung toll.Also eingebaut und Cyclassics gefahren. Toll
Produktempfehlungen
2.95€
0 .99 € 0.99€