Ihr Warenkorb ist leer
Ihr Warenkorb ist leerTitan Krähenfußschlüssel werden zum Anziehen und Entfernen von Muttern und Schrauben in engen Bereichen verwendet. Der Krähenfußschlüssel ist aus Chrom-Vanadium-Stahl für Stärke und Haltbarkeit mit einer hochglanzpolierten Oberfläche.
Tim
Bewertet in Australien am 19. Januar 2024
Did the job getting seized inner tie rod ends off. Used with a rattle gun and extension and survived to live another day.Not cheap but it seems decent.
Danny Levitoff
Bewertet in den USA am14. Januar 2024
Liked very sturdy high quality!!!
Angelo
Bewertet in Kanada am 10. Juni 2024
I had to grind the tool down by about 1/4 of an inch to fit on the driveshaft nut on my 335d, other then that the tool felt solid and did its job even tho the nut was very tight and I had limited space working on the ground.
Georgia Brigand
Bewertet in den USA am10. Juli 2024
Rebuilding vintage cars and motorcycles, I often run into weird spots where even a big set of mechanic's tools won't do. The latest was a motorcycle engine flywheel with a 32mm wrench surface for holding the crankshaft inside the flywheel while loosening the nut with a heavy-duty ratchet. I needed to replace the starter clutch that lives behind the flywheel. No wrench or pliers would fit in there to stop the crankshaft from turning, and online offers outside of Amazon showed really flimsy looking stuff.I was thinking about cutting a 32mm open-end wrench into pieces and welding those up into an offset tool. But this current crowfoot was a simpler solution. It only needed a little trimming to fit into the flywheel. With a 2" long 1/2" drive socket extension, it made for the perfect tool to hold the crankshaft while I was opening the nut holding the flywheel. Reassembly was the reverse procedure. The present 32mm crowfoot wrench held up perfectly while I had to apply a scary 190 ft-lbs of torque. All is well again inside that engine.
M. Benedict
Bewertet in den USA am10. Mai 2024
Had 2 Grohe faucets that I could not get a plumbing wrench enough clearance to tighten down the 32mm nut onto the faucet from under the vanity. This did the job!
Produktempfehlungen
13.99€
6 .99 € 6.99€
34.49€
15 .99 € 15.99€