Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
-
WIG-Modus Wechseln
Verbinden Sie die Erdungsklemme mit dem Pluspol („+“)
Den WIG-Brenner mit dem Minuspol („-“)
-
MMA Modus wechseln
Verbinden Sie die Erdungsklemme mit dem Pluspol („+“)
Elektrodenhalter mit dem Minuspol („-“)
Verbesserte Version des TIG200I WIG/E-Hand Schweißgeräts
Kunde
Bewertet in Deutschland am 12. März 2025
Preis ist ok
Herwolf
Bewertet in Deutschland am 7. Dezember 2024
Der WIG schweißgerät funktioniert richtig gut. Ist klein leicht. Und Power hat er genug auch die dicke metalle zu schweißen. Habe selbst noch nie mit wig geschweißt, und es hat nach paar mal schon gut funktioniert. Bin kein Profi. Habe für edelstahl zu schweißen gekauft.(100 rohre ). Mit 60Ah, 2mm edelstahl, hat gut verschweißt. Das einzige Problem für mich war, den Gerät sofort zu testen, dass die Wolfram elektrode ist nicht im set dabei, muss separat bestellt werden. Wenigstens ein wäre nicht verkehrt. Das Normal schweißen mit Stab elektroden habe nicht getestet, aber ich glaub es funktioniert ohne Probleme. Im großen ganzen für seine Größe richtig TOP.
steve corbey
Bewertet in Großbritannien am 31. Dezember 2024
I bought this welder about a month ago, primarily to carry out some small scale TIG work. I am hoping that this will trigger the seller to contact me as i wish to return it following it's catastrophic failure this afternoon. The welder has done a maximum of 45 minutes work on and off over a month. Following a short run on mild steel at 50A, the unit was sat idle while i turned of the argon. As i approached the unit to turn it off, i heard a 'whooshing' sound and huge amounts of white smoke pouring out of the unit's vents. I quickly pulled the plug and got out of my workshop. However, when it was functioning as expected, it did perform really well for a lift TIG machine. No idea how it performs as a stick welder, sadly it lost it's grip on usefulness before i got to test that function. I may have got a 'dud' (it happens), so if and when i hear from the seller and get a replacement i may change my feedback.
nonnazaccio
Bewertet in Großbritannien am 27. Juni 2024
Works well
John
Bewertet in Großbritannien am 27. Mai 2023
I am amazed with how well this little welder works, this tiny little unit works as well as 3 phase industrial welders I have used.I can gas, mig and arc weld, I have never used tig before and I don’t weld all the time soTig welderIt works very well The torch for the tig welder isn’t the best and you do need to purchase electrodes extra from the welder, I need a bit of guidance on setting up the electrode side, however I have done welding with the tig welder and there is plenty of power there, really I need thicker electrodes.Arc welderOutstanding, if someone would tell me I could use this with 1.6 mm rods on 1.5 mm steel and yet it had enough power to use 2.4mm rods on 1/4 steel, I would never have believed them, it strikes an arc beautifully, very easy to use, in fact on 1/4 steel I had to turn it down, amazing little welder.If you was doing car body really you do need a mig welder, it is much quicker than Tig, the Tig for me really is so I can weld aluminium and braze smaller projects, the Arc welding side of it is outstandingExcellent value for money and ideal for someone who doesn't weld all the time, not too expensive to leave sat on the shelfAbsolute brilliant buy, I am thrilled. To bits with it10/10 for what it is.The only con is the Tig torch isn’t that good, also it doesn’t come with an argon regulator attachment but that said look at the price and accept you are buying a great little welder for buttons, I’ve used far more expensive welders that have under performed compared to their price
joe cusimano
Bewertet in den USA am17. September 2022
it works good
Anthony Christopher
Bewertet in den USA am12. Oktober 2022
Works great on thin metal like 22ga. Cold rolled sheet metal. I’ve also welded 3/16 thick steel (walk behind mower front wheel spindle) and it worked great for that also. It is actually pretty consistent as far as duty cycle, I haven’t pushed it to the limit yet but honestly I think it’s a great budget Tig welder for the money. The torch has a finger switch to initiate the arc. So don’t get confused it is only a switch, it will not adjust the heat like a pedal so id recommend practicing on some scrap metal to dial in your heat. Other than that it’s solid.
Produktempfehlungen
132.00€
59 .99 € 59.99€