Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Es kann für Steckdosen und Steckverbinder derselben Serie verwendet werden.
Verpackungsmenge: 1 Stück;
Modellnummer: DKJ35-50;
Nennstrom: 315 Ampere;
Drahtquerschnitt: 35–50 mm2;
Verpackungsmenge: 2 Stück
Sebulke
Bewertet in Deutschland am 6. Januar 2025
Der Artikel so wie beschrieben alles gut
Robert A.
Bewertet in Großbritannien am 14. April 2025
Very good
Customer
Bewertet in den USA am6. August 2024
Replaced a worn cable end on my machine with these and they fit great. I would recommend these if you are needing some.
Rick
Bewertet in den USA am4. Mai 2024
Used to make a new ground cable. I found the quality great and the fitment in the welder socket tight and secure. If needed i would buy again as a very reasonable price for a high quality cable end.
Roger DeLano
Bewertet in den USA am12. Oktober 2024
Fits my amico 165 welder perfect. Good quality ,i would buy again
Ed
Bewertet in den USA am24. November 2023
Feels very well built. I made a ground lead for my welder but haven't had the chance to try it out yet. You can fit 3/0 cable in this connector with a minor modification. You only need to grind down the bottom of the set screw so the sleeve will slide over it. It fits in my machine with a nice fit like the expensive brand that came with the machine. I liked these so much I ordered a second set to make some other leads for the same machine. Just a little bit of silicone spray helps the shield slide right over the connector end. Without the spray it was pretty tough in the cold shop to get it to seat fully. If you have a warm work environment I doubt you would even need the spray.
Produktempfehlungen
28.01€
14 .99 € 14.99€