Ihr Warenkorb ist leer
Ihr Warenkorb ist leerHarald Hackmann
Bewertet in Deutschland am 16. August 2024
Arbeitet perfekt mit der Focusrite PCIeNX-Karte zusammen
Aviously
Bewertet in Deutschland am 6. Januar 2021
The product is perfect .delivery came on time. thank you for your service
derek j hillier
Bewertet in Deutschland am 24. Mai 2021
Brilliant and robust works perfectly
Tapken Uwe
Bewertet in Deutschland am 17. Juni 2021
Guter Adapter, Decklink-Karte wurde sofort vom Laptop erkannt. Im Einsatz gab es keine Probleme…
Dean Evans
Bewertet in Kanada am 6. September 2020
Worked as advertised. Easy install/setup. No complaints.
YT-3000
Bewertet in Deutschland am 4. August 2020
funktioniert vom ersten Moment an. Bisher keinerlei Aussetzer o.ä.Ich verwende den Echo Express am iMac 2019, als Adapter für eine IDE DSP Karte.Ja, der Lüfter ist zu hören, aber ich empfinde es nicht als Störend. Zur Not, kann man ein längeres USB Kabel holen und das Gerät somit weiter wegstellen.
Brad Halstead
Bewertet in Australien am 31. Januar 2020
Fan is pretty loud, but otherwise great
mojo
Bewertet in Deutschland am 25. März 2020
Das Sonnet Gehäuse ist absolut wertig verarbeitet, robust.Es gibt zwei Thunderbolt 3 Anschlüße, funktionieren Tadellos.Manko, aus diesem Grund auch Punktabzug:Ich benutze das Gehäuse im eine Dante Netzwerk Accelerator Card zu betreiben, das funktioniert einwandfrei.Jedoch ist im Gehäuse ein Lüfter verbaut der in einem Quadratischen Blechkasten im Boden verbaut ist. Bedingt durch den Strömungsweg den die Luft nehmen muss bei 90" Winkeln - ist das Lüftergeräusch recht laut.Denke es handelt sich hierbei um einen Design Fehler...Weiterhin finde ich das Gehäuse recht kostspielig, dafür gibt es keinen Punktabzug, aber ich kommentiere das.
淀橋第六
Bewertet in Japan am 21. Februar 2018
カードのセット 及び セット後について現在までトラブルは起きていない。サンダーボルト以外の出力がないことが清々しい。当然、ほかの出力がない。高価にも係わらずにだ。それが欠点といえば欠点で、−1とした。
Philippe
Bewertet in Frankreich am 16. Mai 2018
Très satisfait. Je l’ai acheté pour installer un Samsung Evo 960 NVME 512g SSD afin d’agrandir le capacité de mon MBP 2017.Avec un adaptateur SSD à PCIE , j’ai obtenu un débit lecture/écriture d’environ de 2300MB/s et 1900MB/s.Même c’est moins rapide que d’installer le SSD directement dans l’ordinateur, c’est déjà pas mal.Attention il faut connecter le boitier sur la prise TB3 du gauche de MBP le plus proche de vous pour obtenir ces débits.Car les quatre prises n’ont pas les mêmes band puissance de PCIE (à gauche X4, à droit X2 à partager par deux prises)J’ai testé sur les trois autre prise, le débit est plutôt 1800MB/s et 800MB/SSeul bémol, le ventilateur est un peu bruyant si vous mettez le boitier sur table.Une fois remplacé un ventilateur de Noctua, c’est nickel
Michael Anderson
Bewertet in Großbritannien am 10. Mai 2018
Does exactly what it says on the tin, allows use of a PCIe card with a daughter board.Be aware, there is a difference between _Thunderbolt 2_ and _Thunderbolt 3_. Thunderbolt 2 is a squareish connector. Thunderbolt 3 shares form with the USB-C connector and has extra functionality on top of USB-C, and is thin and wide with rounded edges, also reversible. This is a TB3 dock. They also sell a different TB2 enclosure which looks the same other than the ports at the back.It says that external graphics cards are not supported, but they sell a separate GPU dock for that. This is most likely due to the huge power draws for graphics cards. This has a small fan, but it's fairly quiet and for the tech handy can be replaced. The slot type is PCIe, not the old PCI standard (but adapters exist).It has 2 ports for the intended Thunderbolt passthrough, a premium over many TB products that only has a single port and have to form the end of a chain.Sonnet has a very useful compatibility chart on their website showing a mass of PCIe cards they have tested. showing the compatibility is very high. This is something I strongly appreciated, as Thunderbolt is a rather messy technology and there has been a string of poor and crashy implementations and docks.Build quality is good and light weight, made for standing on a desk, not really flimsy but not built like a tank either. On par with an external hard drive, definitely portable but I would be careful with it. Swapping out the card does take a minute as you have to unscrew the feet. For several cards I would get their 3-card enclosure, but that's also 3x the price.I bought this for use with an UAD-2 card in Pro Tools, and it works great. I did a lot of research beforehand and it seems to be the best and safest for what it does.
Produktempfehlungen