Ihr Warenkorb ist leer
Ihr Warenkorb ist leerRix.Lumb
Bewertet in Großbritannien am 5. Januar 2025
I bought 12 of these to replace all of another brand (S*O*N*O*F*F) which uses 2032 button cells, they paired with any of the Hubitat models within about 10-15 seconds whether they were 1m or 10m away.The driver it picked up was the built in Generic Zigbee Contact Sensor (no temp)They all needed an upgrade from 0x30 to 0x3F which was easily done via Hubitat within about 10mins, about 60 secs per 10% block, the progress can only be seen in the live logs for the Hub.This gives you:Optimized the network joining and reconnecting algorithmsOptimized the power detection logicOptimized the trigger filtering algorithmFrom what I have experienced, the upgrade procedure is well protected and never bricked any of them, each 10% block is transferred and checksumed, at 100% the upgrade is transferred to its flash memory.The device still has live operation during the upgrade process.I made a mistake on the first one by unpairing/re-pairing while it was upgrading, simply because I did not realise anything was happening viewing the device page. When I found where I could see the progress, it had stopped at 30%, after 2 mins I realised the upgrade had been cancelled by my actions without any harm. The upgrade was just started again and completed without error.The great thing about these 3rdReality devices is that they use a modern hall effect sensor to trigger via the magnet instead of an antique reed switch, so they can be mounted offset slightly on windows and doors, the max detection range is about 25mm so best to stick with 15mm or less if the magnet is not on the same plane.As long as you dont have any poor/ chatty/ proprietary Zigbee protocol devices on the Hub and have good plug in repeater mains sockets between far off devices to create a good Zigbee mesh they operate automations in Rule Manager within a second , no matter how far away they are from the Hub.I am very impressed with this brand and have purchased 8 Temperature/Humidity lite sensors, again uses 2 x AAA supplied and also a couple of the waterproof soil moisture/temperature sensors to assist in the automated garden watering .
Cahei
Bewertet in Deutschland am 3. März 2025
Verrichtet seinen Dienst jetzt ohne Probleme seit 2 Monaten. Batterie steht bei 87%. Einzig die Einrichtung war wegen Entfernung zum Hub nicht ganz so einfach. Musste noch eine Steckdose als repeater dazwischen.Einziger Kritikpunkt : ich hätte es mir etwas kleiner gewünscht.
Pole
Bewertet in Großbritannien am 25. Januar 2025
Excellent product. Though at the beginning the battery percentage was fluctuating. It later stabilised and now works as advertised. The sensors are easily added to Zigbee Home Assistant and the battery seems to last long (two months at 100% since installed).Above all, this sensors are awesome because they operate with two AAA batteries, and yet they are not so bulky.
F
Bewertet in Deutschland am 11. Januar 2025
Ein gutes Produkt. Es funktioniert, wie es sollte. Lässt sich ohne Probleme an die FRITZ!Box 5690 Pro anschließen.Der Abstand zwischen Sensor und Magnet ist sehr gut.
Huh
Bewertet in den USA am10. Januar 2025
I bought THIRDREALITY Zigbee Contact Sensor 4 Pack for for $41.99 on Noveber 21, 2024. This contact sensor is definitely one of the sensors I have, and it works well every single time. I love that it uses AAA batteries unlike other sensors I have, and I had no issues connecting it to Hubitat.One item to note is that these contact sensors are rather big. My other sensors are significantly smaller, but they also do not use AAA batteries. Given that my sensors are not easily visible where I placed them, their size is not an issue for me. But be aware that these are big / slightly bulky.I am very happy with this and would definitely buy them again.
Filmonalarterie
Bewertet in Deutschland am 29. Juli 2024
könnte man von einem okayen Sensor sprechen. So ist er wenigstens günstig.Leider ist er derart raumfordernd, dass er sich wohl für die meisten Türen, aber wohl auch für die wenigsten Fenster eignet.Immerhin ist er nicht dezent und bietet sich damit wohl für Keller- und andere Räume an, die nicht wohnlich sein müssen.
Elke
Bewertet in Deutschland am 28. Oktober 2024
negativ: 2 Stück geliefert, beide verlieren immer wieder die Verbindung zum Zigbee Coordinator neue Batterien und Entfernung veringert war erfolglos Fehler trat immer wieder aufpositv: AAA Zellen, HomeAssistant kompatibel mit FW Updates integration und keine solche Probleme mit anderen 3real Komponennten (Vibr /Steckdose)
MS
Bewertet in Deutschland am 26. Juni 2024
Unlike my old Bitron sensors, these don't seem to be realiant on a specific device to connect. After a power outage (move echo to a new room, or accidently to use a different device) these reconnect without a problem. Very happy!
PG
Bewertet in Frankreich am 26. November 2024
Distance d' ouverture : jusqu a 3cm - 2 piles AAA, toujours sur d avoir un capteur qui fonctionne, trés vite reconnu par HA
antonio.c
Bewertet in Italien am 20. Dezember 2024
Ottimo, é il terzo che monto e in funzione da mesi, connesso al volo con hub zigbee incorporato nel mio Echo Plus, usa batterie standard che è per me importante a discapito magari delle dimensioni ma rispetto a altri prodotti simili che usano batterie costose meglio questa soluzione.
Millyfan
Bewertet in Deutschland am 17. Februar 2024
Dieser Türenfenster Kontakt funktioniert hervorragend mit SmartThings. Lässt sich super leicht einbinden und funktioniert tadellos.
Produktempfehlungen